adc jobs in San Diego

Develop bare-metal firmware for an STM32H7-based multichannel thermal control system, implementing simultaneous temperature acquisition from I2C and RTD sensors, multiple independent PID control loops, and Ethernet communication at 100 Mbps. Responsibilities include hardware bring-up, debugging peripherals (ADCs, I2C, PWM, Ethernet, GPIOs), system testing, and performance optimization.…See more The role requires 7+ years of embedded firmware experience (or 4+ with an MS degree), strong C programming, extensive STM32H7 expertise, closed-loop control algorithm implementation, and proficiency with oscilloscopes, logic analyzers, and multimeters for hardware troubleshooting.

The Product & Test Engineer will validate and debug new silicon, develop ATE hardware and software solutions, and characterize device performance across process and operating conditions. The role involves cross-functional collaboration to develop test methodologies for advanced packaging technologies and release cost-effective production test solutions to mass production.…See more Required qualifications include a Bachelor's degree in Computer Engineering or Electrical Engineering and 3+ years of silicon bring-up, high-volume manufacturing, or related hardware engineering experience. Experience with test equipment (oscilloscopes, spectrum analyzers, logic analyzers), ATE platforms like Advantest 93K SOC, and DFT techniques is preferred.

Develop bare-metal firmware for an STM32H7-based multichannel thermal control system, implementing simultaneous temperature acquisition via I2C and RTDs, multiple independent PID control loops, and Ethernet communication. Support hardware bring-up, integration, validation, and troubleshooting of peripherals including ADCs, PWM, and GPIOs.…See more Requires 7+ years embedded firmware development (or 4+ with MS degree), strong C programming, STM32H7 experience, and hands-on hardware debugging capability.

Senior embedded software engineer responsible for designing, developing, and integrating embedded C/C++ software for next-generation intravascular ultrasound (IVUS) medical devices. The role requires 7+ years of embedded systems experience, strong hardware/software integration skills, expertise with microcontrollers, DSP, FPGA, and data acquisition systems.…See more Responsibilities include ultrasound signal processing, FPGA-to-console interfaces, diagnostics/test software development, and cross-functional collaboration with FPGA, electronics, systems, and manufacturing teams.

Develop bare-metal firmware for an STM32H7-based multichannel thermal control system, implementing simultaneous temperature acquisition, multiple independent PID control loops, and Ethernet communication. Support hardware bring-up, integration, and validation, troubleshooting peripherals and interfaces (ADCs, I2C, PWM, Ethernet, GPIOs) in the laboratory.…See more Requires 7+ years of embedded firmware experience (or 4+ with an MS), strong C programming, proven expertise with STM32H7 devices and closed-loop control algorithms, and hands-on proficiency with oscilloscopes, logic analyzers, and multimeters.

Senior Firmware Engineer responsible for developing and optimizing low-level embedded C++ software for avionics systems, flight controllers, and mission payloads. The role involves porting frameworks to new RTOSes and hardware platforms, creating BSPs and HALs, designing peripheral drivers (I2C, SPI, UART, ADC, wireless protocols), and conducting safety-critical testing including MISRA C compliance.…See more Requires 5+ years of embedded systems experience, strong Linux/Windows proficiency, Python/Bash scripting, and ability to diagnose cross-domain issues across electromechanical, software, networking, and RF subsystems.

Develop embedded software for microcontroller-based systems using C/C++, bare metal, and real-time operating systems, including board bring-up, device drivers, bootloaders, and firmware. Create PC-based diagnostic and test automation applications in C#.…See more Perform unit and integration testing, debug hardware-software issues, and validate software across environments. Collaborate with electrical, mechanical, and quality teams to integrate modules, optimize for performance and power efficiency, and ensure compliance with safety standards.

Develop FPGA-based solutions using hybrid C/C++ microprocessor and HDL fabric architectures, designing robust component interfaces to ADCs, DACs, and microcontrollers. Design and develop complex data acquisition and analysis systems for system health monitoring, perform integration and verification testing of integrated hardware and firmware platforms, and collaborate with cross-functional teams.…See more Requires 2+ years of FPGA/embedded development experience, proficiency in C/C++, Xilinx Vivado/Vitis, digital logic, computer architecture, and device-level communication protocols (SPI, I2C, Ethernet, Serial).

Design and develop firmware for DSP-based digital control systems in programmable AC & DC power products. Implement digital control algorithms, perform design analysis (gain/phase plots), create test plans to validate performance, and develop bootloaders for DSPs and microcontrollers.…See more Requires 8+ years of power control experience in power supply applications (DC-DC converters, PFC systems, grid-tied inverters), expertise in power electronics topologies, embedded C and Assembly programming, and 6+ years with communication protocols (SPI, I2C, CAN).

Develop and optimize low-level embedded firmware in C++ for avionics systems, flight controllers, and mission payloads, focusing on performance, reliability, and safety-critical applications. Port frameworks and applications to new RTOSes and hardware platforms, create Board Support Packages (BSPs), adapt Hardware Abstraction Layers (HALs), and develop peripheral drivers for interfaces like I2C, SPI, UART, and ADC.…See more Conduct unit and integration testing including fault injection and MISRA C compliance checks, diagnose cross-domain issues across electromechanical, software, networking, and RF subsystems, and collaborate with hardware teams to validate firmware incorporating secure boot, watchdogs, and fault-tolerant designs. Requires 5+ years embedded systems development, U.S. citizenship, ability to obtain DoD security clearance, strong Linux/Windows proficiency, and expertise in Python, Bash, Shell, and C/C++.

Senior Firmware Engineer responsible for developing and optimizing low-level embedded software in C++ for flight-critical avionics and UAS systems. Will port frameworks to new RTOSes and hardware platforms, create board support packages and hardware abstraction layers, develop peripheral drivers (I2C, SPI, UART, ADC, wireless), and conduct unit/integration testing including MISRA C compliance.…See more Requires 5+ years embedded systems experience, bachelor's degree in Aerospace/Electrical/Systems/Mechanical Engineering, U.S. citizenship, and ability to obtain DoD security clearance.

Tesla seeks an embedded software engineer to develop firmware for cell formation manufacturing systems. The role involves writing embedded C and Python code for real-time controls, battery management algorithms, power conversion, and functional safety across prototyping through high-volume production.…See more You will collaborate with manufacturing and electrical engineering teams on hardware bring-up, system validation, and production integration. The position requires proficiency in C/C++, embedded protocols (CAN, UDS, etc.), and a strong foundation in electrical engineering concepts and software fundamentals.

Senior Firmware Engineer role focused on developing and optimizing low-level embedded software in C++ for flight-critical avionics and unmanned aerial systems (UAS). You will port frameworks to new RTOSes and hardware platforms, create Board Support Packages and Hardware Abstraction Layers for ARM Cortex-M architectures, develop peripheral drivers (I2C, SPI, UART, ADC, wireless), and conduct unit/integration testing including MISRA C compliance checks.…See more You'll diagnose cross-domain issues across electromechanical, software, networking, and RF subsystems, and translate mission requirements into technical specifications and test documentation.

Axos Bank seeks a Systems Engineer to manage and monitor infrastructure and system installations, including configurations, testing, and maintenance. The role requires seven years of progressive experience in VMware (ESXi, vCenter, Horizon VDI), Citrix (Virtual Apps and Desktops, NetScaler ADC), storage systems (HPE Nimble, SAN/Brocade), virtualization platforms (Nutanix AHV, Hyper-V), directory services (Active Directory, DNS, DHCP), and Microsoft Azure administration.…See more Candidates must hold a Bachelor's degree in Electronic Engineering, Computer Science, or related field and demonstrate expertise in designing scalable, highly available virtual environments and managing cloud resources.

Axos Bank seeks a Systems Engineer to manage and monitor infrastructure and system installations, including configurations, testing, and maintenance. The role requires seven years of progressively responsible experience in VMware infrastructure deployment and administration, Horizon VDI, Citrix Virtual Apps and Desktops, Citrix NetScaler, storage systems (HPE Nimble, SAN/Brocade), Ivanti User Virtualization, Active Directory/DNS/DHCP, and Microsoft Azure administration.…See more Candidates must hold a Bachelor's degree in Electronic Engineering, Computer Science, or a related field.